Apple Watch makes it easier to perform phone activities without taking your phone from your pocket. However, battery drainage is a common problem with these watches, and here are some effective solutions you can consider. To save battery on your device, go to Settings and then Display & Brightness. Turn off the Always On Display feature and Wrist Raise. Next, open the Workout app and turn off Workout Mode in the Settings. Also, set the low power mode and close the apps that are not in use. For expert help, considering an Apple watch repair professional would be the best solution.
Seven Solutions To Fix Apple Watch Battery Drainage Problem
If you are dealing with frequent Apple Watch drainage problems, here are the top seven solutions.
Disable Always On Feature
This feature may drain your battery very fast. Although the Always On watch is a nice feature in newer versions of the Apple Watch, it could be better if you want to extend the life of your battery. This feature is available by default if you have an Apple Watch Series 5 and later.
So, to minimize Apple Watch battery drainage and to turn this off, follow the given steps:
- Tap the Digital Crown and tap the app Settings.
- Scroll and tap on Display & Brightness.
- Find the Always On button and turn it off.
End Workout Mode
In workout mode, the Apple Watch uses extra battery power. It reports your heart rate continuously rather than sampling it every few minutes. If your watch doesn’t understand you have finished your exercise, it’ll keep running at higher power for longer than you want. So, just get into the practice of ending your workouts on your Apple Watch every time you finish by the given steps:
- Swipe right on the Workout screen.
- Tap End.
Enable Low Power Mode
Enabling this mode will optimize your Apple watch battery life. While you can turn on Low Power Mode only during a workout, you can also activate it all the time and thus consume fewer calories from your watch’s total battery. You will need to have installed watch iOS 9 or later to enable this:
- Press the Digital Crown and open Settings.
- Scroll down and select Battery.
- Tap to enable Low Power Mode. When activated, a yellow circle will appear in a circle on top of your watch screen.
- Depending on which version of watchOS you’re running, tap the side button and enter Control Center to find and press Low Power mode.
When your Watch is in Low Power Mode, features such as Always On, Time in Daylight, and heart rate measurements are disabled.
Repair your Watch and iPhone.
If your watch battery drains faster than it normally would, you might find some pairing problems. You can quickly solve most problems by de-pairing your watch and pairing it with a new device. It may wash away some viruses affecting the battery and causing the glitch. To do so, follow the steps below:
- Open the Watch app on your iPhone.
- Tap the My Watch tab, then tap All Watches at the top-left corner of the screen.
- Tap the information next to your Apple Watch.
- Tap Unpair Apple Watch.
- Pair your Apple Watch again.
Disable Wrist Raise
It can be a battery-eating feature if you’re one of those who use their hands often. When Wrist Raise is enabled, your watch will turn on every time you raise your arm to look at it. Turning off the Wrist Raise can help you get the most out of your battery life. To turn Wrist Raise off:
- Press the Digital Crown and open the Settings app.
- Scroll down and tap Display & Brightness.
- Under the Wake header, tap the toggle next to Wake on Wrist Raise.
- Click to turn it off.
Close Apps Not In Use
Even when you are not actively using an app, it often runs in the background, consuming battery power. Closing unused applications will improve the battery life of your Apple Watch. It might happen with frequent exercisers who open the exercise app to get started on a run but forget to press End afterward. To completely close the fitness app, you need to use the End button on the app. You can also remove it from your Apple Watch background.
Avoiding Unwanted Weather
It may seem weird, but batteries behave according to the surrounding weather conditions. Thus, they only function well when the weather is detectable. For example, your gadget might lose battery power when it is too hot or cold. Hence, you should be cautious about keeping the watch away from intense sunlight so the battery does not heat up. A very hot or cold battery means that it drains sooner than usual. So, the trick is to keep your watch safe from unwanted weather conditions.
Why Isn’t My Apple Watch Holding A Charge?
Check the charging cable for damage. Always use a charging cable approved by your manufacturer or device instructions. This will avoid an increased charging duration and improve the overall battery performance.
Conclusion
Here are all the common solutions to Apple Watch battery drainage issues. Turn off the Always On mode, Workout Mode, and Wrist Raise. Turn on Low Power Mode, and close the apps that are not in use. If you are still facing battery issues, visit an Apple watch repair service provider as soon as possible. A delayed repair can lead to more damage.